Adjusting Screen; Zoom Adjustment; Focus Adjustment; Lens Shift Adjustment - Sanyo PLV-60HT Owner's Manual

1 Press ZOOM / button(s) on Top Control or on Remote
Control Unit. The message "Zoom" is displayed.
2 Press ZOOM button or POINT UP button to make image
larger, and press ZOOM
make image smaller.
1 Press FOCUS / button(s) on Top Control or on Remote
Control Unit. The message "Focus" is displayed.
2 Adjust focus of the image by pressing FOCUS
POINT UP/DOWN button(s) .
1 Press LENS SHIFT
SHIFT button on Remote Control Unit. The message "Lens
shift" is displayed.
2 Press LENS SHIFT
image up, and press LENS SHIFT
button to move image down.
Refer to P9 for operating range.
If image has keystone distortion, correct image with KEYSTONE adjustment.
1 Press KEYSTONE button on Remote Control Unit or select
Keystone on SETTING Menu (P36). The message "Keystone" is
displayed.
2 Correct keystone distortion by pressing POINT UP/DOWN
button(s). Press POINT UP button to reduce upper part of the
image, and press POINT DOWN button to reduce lower part of
the image.
To reset Keystone adjustment, press NORMAL button.
Reduce the upper width with POINT UP button.

ADJUSTING SCREEN

ZOOM ADJUSTMENT

button or POINT DOWN button to

FOCUS ADJUSTMENT

/

LENS SHIFT ADJUSTMENT

/ button(s) on Top Control or LENS
button or POINT UP button to move
button or POINT DOWN

KEYSTONE ADJUSTMENT

Message disappears after 4 seconds.
button(s) or
Message disappears after 4 seconds.
Message disappears after 4 seconds.
Keystone
Message disappears after 4 seconds.
Reduce the lower width with POINT DOWN button.
BASIC OPERATION
Zoom
Focus
Lens shift
21