Image Level Adjustment - Sanyo PLV-60HT Owner's Manual

Sanyo owner's manual multimedia projector plv-60ht

Hide thumbs Also See for PLV-60HT:

Service manual (116 pages)

Table Of Contents

Table of Contents

VIDEO MODE

Press MENU button and ON-SCREEN MENU will appear. Press

POINT LEFT/RIGHT button(s) to move a red frame pointer to

IMAGE ADJUST Menu icon.

Press POINT DOWN button to move a red frame pointer to the

item that you want to adjust and then press SELECT button.

The level of each item is displayed. Adjust each level by

pressing POINT LEFT/RIGHT button(s).

Contrast

Press POINT LEFT button to decrease contrast, and POINT RIGHT

button to increase contrast. (From 0 to 63.)

Brightness

Press POINT LEFT button to adjust image darker, and POINT

RIGHT button to adjust brighter. (From 0 to 63.)

Color

Press POINT LEFT button to lighten color, and POINT RIGHT button

to deeper color. (From 0 to 63.)

Tint

Press POINT LEFT button or POINT RIGHT button to obtain proper

color. (From 0 to 63.)

White balance (Red)

Press POINT LEFT button to lighten red tone and POINT RIGHT

button to deeper tone. (From 0 to 63.)

White balance (Green)

Press POINT LEFT button to lighten green tone and POINT RIGHT

button to deeper tone. (From 0 to 63.)

White balance (Blue)

Press POINT LEFT button to lighten blue tone and POINT RIGHT

button to deeper tone. (From 0 to 63.)

Sharpness

Press POINT LEFT button to soften the image, and POINT RIGHT

button to sharpen the image. (From 0 to 31.)

Gamma

Press either POINT LEFT button or POINT RIGHT button to obtain

better balance of contrast. (From 0 to 15.)

Noise reduction

Set "On" to reduce noise (rough parts) of the image

Progressive

Set "On" to provide progressive scan mode.

NOTE : Tint cannot be adjusted when the video system is PAL,

SECAM, PAL-M or PAL-N.

Noise reduction cannot be selected when the input signal is

from Y, Pb/Cb, Pr/Cr jacks.

Progressive cannot be selected when "480p," "575p" or

"720p" is selected on SYSTEM Menu (P32).