Advertisement
KIT FEATURES
KIT FEATURES (cont. from cover)
• Complete Plug-n-Play installation
• Includes dash kit with Axxess interface and
vehicle-specific T-harness
• Includes a 3' USB/AUX/HDMI replacement
cable with panel
• Includes radio antenna adaptor for GPS
• Provides accessory power (12-volt 10-amp)
• Provides NAV outputs (parking brake,
reverse, speed sense)
INTERFACE INSTALLATION
Install the provided speaker in the dash prior
to assembling the radio components.
Note: Make sure this is mounted in a location
suitable for the driver to hear. (Audio level
for the speaker can be changed via the radio,
once installed.)
2
(CONT.)
• Retains audio controls on the steering wheel
• Works in both single and dual-zone vehicles
• Retains safety chimes through an included
off-board speaker
• USB Micro B updatable
• Dash kit is painted scratch-resistant matte
black to match the factory finish
DASH DISASSEMBLY
Models equipped with a 7-inch touchscreen radio:
1. Using the panel removal tool, gently unclip,
unplug, and remove the radio control trim
panel. (Figure A)
2. Remove (4) 9/32" screws securing the radio,
disconnect the wiring, and then remove the
radio. (Figure B)
Continue to Connections
(Figure A)
(Figure B)
Advertisement
