Table of Contents
Advertisement
If the vehicle is equipped with rear parking sensors that you wish to retain:
• Install the provided speaker in the dash prior to assembling the radio components.
• Make sure this is mounted in a location suitable for the driver to hear.*
* Audio level for the speaker can be changed via the radio, once installed.
From the LD-CH5-PIO:
The following connections should be made just prior to final installation to test all functions of
the new radio.
• Connect the 16-pin connector into the Radio Interface.
• Connect the 22-pin connector into the Radio Interface.
• Connect the External Speaker to the 2-Pin labeled "EXT SPKR".
• Connect the 18-pin plug into the PR04AVIC-PIO Radio Harness.
• Connect the small 4-pin straight connector directly into the radio. (Metra Adapter Input)
• Connect the plug labeled "AUX IN" to the AUX-Input on the radio.
• Disregard the Red/White RCA pair, it will not be used in this application.
Connect the RCA pair from the AXUSB-RAM1 instead.
• Disregard the Yellow RCA, It will not be used in this application. (See Camera Installation).
• Connect the Yellow Male RCA from the JP-JTKT Installation to the Rear Camera input.
12
INTERFACE INSTALLATION
• Connect the 40-GPS-PIO To the radio and to the GPS antenna in the vehicle.
This can be Blue, or Yellow in color.
Note: Alternatively, the GPS antenna supplied with the Pioneer radio can be used.
• Connect the 40-EU10 to the radio and to the FM/AM antenna in the vehicle. White in color.
• Connect and route the microphone provided with the Pioneer radio to a suitable location.
• Connect the 2-Pin labeled "CAN 2" to the LD-CHRYHAZ2T.
• Connect the 2-Pin labeled "CAN 3" to the LD-2PIN-CAN, or LD-CAN3T for TPMS.
• Connect the LD-CHRYHAZ2T and the Start/Stop button harness into the climate control panel.
• Connect the LD-CHRYHAZ2T into the harness previously removed from this panel.
• Connect the LD-CH5-PIO into the vehicles harness, then test the operation of the kit.
Note: Refer to Pioneer Installation manual supplied with radio for additional details.
• Select the Vehicle Type in the "Car Features" menu. (see radio screenshots).
Important! Verify the backup camera installation, HVAC status & control, Steering wheel audio
controls and External Speaker output prior to completing dash assembly.
Advertisement
Table of Contents
