Table of Contents
Advertisement
INTERFACE COMPONENTS
• AXDIS-TY1 interface • AXDIS-TY1 harness
• Female 3.5mm connector with stripped lead
APPLICATIONS
LEXUS
TOYOTA
ES Series
2007-2012
4-Runner
ES Series
Avalon
(w/ multi disc) 2002-2006
(Camry) Solara 2004-2008
IS Series
2002-2005
Camry (w/o nav) 2012-2013
RX Series
2004-2008
Camry
Corolla
FJ Cruiser
AxxessInterfaces.com
Lexus/Toyota Amp Interface with SWC
2002-2015
INTERFACE FEATURES
• Provides accessory power
(12-volt 10-amp)
• Retains audio controls on the
steering wheel
• Provides NAV outputs (parking
brake, reverse)
TOYOTA (CONT)
2003-2013
Highlander
2008-2013
2011-2012
Matrix
2005-2012
Prius 3rd Gen
(w/o nav)
2012-2015
2007-2011
Plug-In (PHV)
2003-2011
(w/o nav)
2012-2015
2011-2014
Prius
2004-2011
© COPYRIGHT 2020 METRA ELECTRONICS CORPORATION
• Retains the factory AUX-IN jack
• Designed for amplified models
• Retains balance
• Micro-B USB updatable
TOYOTA (CONT)
TOYOTA (CONT)
Rav-4
2004-2014.5
Tundra
Sequoia (w/o nav)
2013
(Double Cab) 2004-2005
Sequoia
2005-2012
Venza (w/ SD card
Sienna
2004-2014
based nav)
Tacoma
2005-2013
Venza
Tundra
2006-2013
AXDIS-TY1
I N S TA L L AT I O N I N S T R U C T I O N S
TABLE OF CONTENTS
Connections to be made ....................................2-3
Installing the AXDIS-TY1.........................................3
Programming the AXDIS-TY1 .................................4
Adjusting the AXDIS-TY1 ........................................4
Steering wheel control settings ........................5-7
- L.E.D. feedback ....................................................5
- Changing radio type ...........................................5
Troubleshooting .....................................................8
TOOLS REQUIRED
• Wire cutter • Crimp tool • Solder gun • Tape
• Connectors (example: butt-connectors, bell
caps, etc.) • Small flat-blade screwdriver
CAUTION!
All accessories, switches, climate
controls panels, and especially air bag indicator
2013-2014
lights must be connected before cycling the
ignition. Also, do not remove the factory radio
2009-2012
with the key in the on position, or while the
vehicle is running.
REV. 1/23/20 INSTAXDIS-TY1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Axxess AXDIS-TY1
Summary of Contents for Axxess AXDIS-TY1
- Page 1 - Remapping the steering wheel control buttons ...6 - Dual assignment instructions (long button press) ...7 INTERFACE COMPONENTS Troubleshooting .............8 • AXDIS-TY1 interface • AXDIS-TY1 harness • Female 3.5mm connector with stripped lead TOOLS REQUIRED APPLICATIONS • Wire cutter • Crimp tool • Solder gun • Tape •...
- Page 2 • Connect the Blue wire to the power antenna wire. • Connect the Gray wire to the right front positive speaker output. Attention! The AXDIS-TY1 will work with both early and late generation model Toyota SWC • Connect the Gray/Black wire to the right front negative speaker output.
- Page 3 • For all other radios: Connect the 3.5mm jack from the AXDIS-TY1 harness into the jack on the aftermarket radio designated for an external steering wheel control interface. Please refer to the aftermarket radios manual if in doubt as to where the 3.5mm jack goes to.
- Page 4 • With a small flat-blade screwdriver, adjust the potentiometer clockwise to raise the audio level; counterclockwise to lower the audio level. • Connect the AXDIS-TY1 harness to the wiring harness in the vehicle. • Once at a desired level, audio level adjustment is complete.
- Page 5 * Note: If the AXDIS-TY1 flashes Red (7) times, and you do not have an Alpine radio connected to 5. Once the desired radio number has been selected, press and hold the Volume-Down button it, that means the AXDIS-TY1 does not detect a radio connected it.
- Page 6 (1) second until the L.E.D. comes on, and then release the Volume-Up button. 1. Eclipse (Type 1) 7. Alpine 13. LG This will tell the AXDIS-TY1 that this function is not available and it will move on to the next 2. Kenwood 8. Visteon 14. Parrot function.
- Page 7 Dual assignment legend 1. Not allowed 6. ATT/Mute 11. Play/Enter 16. Fan-Down * The AXDIS-TY1 has the capability to assign (2) functions to a single button, except Volume-Up and 7. Preset-Up 2. Not allowed 12. PTT 17. Temp-Up * Volume-Down. Follow the steps below to program the button(s) to your liking.
- Page 8 Tech Support line at 1-800-253-TECH. Before doing so, look over the instructions a second time, and make sure the Resetting the AXDIS-TY1 installation was performed exactly as the instructions are stated. Please have the vehicle apart and ready to perform troubleshooting 1.
Need help?
Do you have a question about the AXDIS-TY1 and is the answer not in the manual?
Questions and answers