Advertisement
Models equipped with an 8-inch touchscreen radio:
1. Using the panel removal tool, carefully
unclip and remove the trim surrounding the
radio controls. (Figure C)
2. Remove (2) 9/32" screws securing the radio,
disconnect the wiring, and then remove the
radio. (Figure D)
Continue to Connections
DASH DISASSEMBLY
(Figure C)
(Figure D)
(CONT.)
If using the LD-LAN09-PIO:
1. Using the panel removal tool, unclip the
plastic shroud around the steering wheel
column. (Figure E)
2. Connect the LD-GMSWC to the 10-pin
straight row connector located in the
steering column.
3. Route the LD-GMSWC cable through the
steering column into the dash and back
towards the radio area.
4. Remove (3) bolts from the lower trim cover.
Rotate the steering wheel to gain access to
the bolts, then remove the forward facing
bolts. (Figure F)
NOTE: If RPO is IO5 or IO6, use the LD-LAN09-PIO.
If RPO is IOB, use the LD-LAN10-PIO.
(Figure E)
1
3
(Figure F)
REV. 12/13/21 INSTAXPIO-CAM1
2
3
Advertisement
