Setting The Altitude Alert; Setting The Low Oxygen Alert; Setting The Barometric Pressure; Setting The Fuel Tank Reminder - Garmin D2 AIR X10 Owner's Manual

Setting the Altitude Alert

You can set an alarm to vibrate when you reach a specified altitude.
1 Hold .
2 Select > Aviation > Altimeter Settings & Alerts > Altitude Alert > Status > On.
3 Select Altitude > Alert Threshold.
4 Enter an altitude.

Setting the Low Oxygen Alert

You can set an alarm to vibrate when you reach a low oxygen altitude.
NOTE: The low oxygen alert is not available in watch mode.
1 Hold .
2 Select > Aviation > Altimeter Settings & Alerts > O2 Alert > Status > On.
3 Select Altitude > Alert Threshold.
4 Enter an altitude.

Setting the Barometric Pressure

You can set the current barometric pressure manually or to the pressure at the nearest airport. Manually
adjusting the barometric pressure can help to improve the accuracy of the pressure altitude reading.
1 Hold .
2 Select > Aviation > Altimeter Settings & Alerts > Barometer.
3 Select an option:
• To set the barometric pressure to the nearest airport, select METAR.
• To set the barometric pressure manually, select Manual, and enter a barometric correction value.

Setting the Fuel Tank Reminder

You can set an alarm to sound and display a message reminding you to check the fuel tank gauges.
NOTE: The fuel tank reminder is available only during a flying activity.
1 Hold .
2 Select > Aviation > Fuel Tank Reminder > Status > On.
3 Select Time.
4 Enter a time.

Selecting a Favorite Airport

When you select a favorite airport, you can view the waypoint and METAR information for it on the default watch
face and aviation glances.
1 Hold .
2 Select > Aviation > Favorite Airport.
3 Select an option:
• To search for an airport by its identifier, select Enter Ident., enter all or part of the alphanumeric identifier,
and press .
• To search for an airport near you, select Nearest, and wait while the watch locates satellites.
• To select an airport from your flight plan, select Flight Plan.
A list of airports appears.
4 Select an airport.

Flying Activity

A flying activity starts automatically when your detected climb rate exceeds the value you set in the auto fly
settings. The default auto fly value is 200 fpm.
4 Flying