Table of Contents
Advertisement
Device Information
About the AMOLED Display
By default, the watch settings are optimized for battery life and performance
(Maximizing Battery Life,
page
67).
Image persistence, or pixel "burn-in," is normal behavior for AMOLED devices. To extend the display life, you
should avoid displaying static images at high brightness levels for long time periods. To minimize burn-in, the
D2 Air X10 display turns off after the selected timeout
(Customizing the Display Settings, page
61). You can turn
your wrist toward your body, double-tap the touchscreen, or press a button to wake the watch.
Charging the Device
WARNING
This device contains a lithium-ion battery. See the Important Safety and Product Information guide in the product
box for product warnings and other important information.
NOTICE
To prevent corrosion, thoroughly clean and dry the contacts and the surrounding area before charging or
connecting to a computer. Refer to the cleaning instructions
(Device Care, page
65).
1 Plug the small end of the USB cable into the charging port on your device.
2 Plug the large end of the USB cable into a USB charging port.
3 Charge the device completely.
Product Updates
Your watch automatically checks for updates when connected to Bluetooth or Wi‑Fi. You can manually check for
updates from the system settings
(System Settings, page
59).On your computer, install Garmin Express
(www.garmin.com/express). On your phone, install the Garmin Connect app.
This provides easy access to these services for Garmin devices:
• Software updates
• Course updates
• Data uploads to Garmin Connect
• Product registration
Device Information
63
Advertisement
Table of Contents
