Icons; Setting Up Your Watch; Flying; Aviation Settings - Garmin D2 AIR X10 Owner's Manual

Icons

A flashing icon means the watch is searching for a signal. A solid icon means the signal was found or the
sensor is connected. A slash through an icon means the feature is turned off.

Setting Up Your Watch

To take full advantage of the D2 Air X10 features, complete these tasks.
• Pair the watch with your phone using the Garmin Connect
• Select your favorite airport
• Set up Wi‑Fi ® networks
• Set up music (Music, page
• Set up your Garmin Pay
• Set up safety features
• Go to garmin.com/voicefunctionality/tips
Do not use this watch as a primary means of navigation. See the Important Safety and Product Information guide
in the product box for product warnings and other important information prior to use.

Aviation Settings

Hold , and select > Aviation.
Aviation Units: Sets the units of measure used for aviation data.
Altimeter Settings & Alerts: Allows you to configure the barometric altimeter and alert settings.
Fuel Tank Reminder: Sets an alarm to sound after a specific number of minutes and displays a message to
check the fuel tank gauges.
Favorite Airport: Allows you view waypoint and METAR information for your favorite airport on the default watch
face and aviation glances.

Flying

Phone connection status
Heart rate monitor status
LiveTrack status
Speed and cadence sensor status
Varia ™ bike light status
Varia bike radar status
tempe sensor status
™
(Selecting a Favorite Airport, page
(Connecting to a Wi‑Fi Network, page
16).
wallet (Setting Up Your Garmin Pay Wallet, page
™
(Safety and Tracking Features, page
for tips about using the voice assistant.
app (Pairing Your Phone, page
™
4).
13).
18).
20).
Flying
WARNING
8).
3