Setting The Auto Fly Value; Starting A Flight; Viewing Your Spo2 Readings In Flight; Navigating To The Nearest Airport - Garmin D2 AIR X10 Owner's Manual

Setting the Auto Fly Value

1 Hold .
2 Select Activities & Apps > FLY.
3 Select the activity settings.
4 Select Auto Fly.
5 Select the auto fly value.
A flying activity starts automatically when your detected climb rate exceeds this value.

Starting a Flight

1 Press .
2 Select FLY.
3 Go outside to an area with a clear view of the sky, and wait while the watch locates satellites.
4 Press to start the flight timer.
NOTE: Your activity data is recorded only while the flight timer is running.
5 Start your activity.
6 After you complete your activity, press

Viewing Your SpO2 Readings in Flight

The SpO2 readings are intended for backup information only. Always defer to applicable flight instruments for
primary awareness.
The D2 Air X10 watch has a wrist-based pulse oximeter to gauge the saturation of oxygen in your blood (SpO2).
Knowing your oxygen saturation can help you determine how your body is adjusting to high altitudes. As your
altitude increases, the level of oxygen in your blood can decrease. During a flight, the watch automatically takes
pulse oximeter readings more frequently, so you can monitor your SpO2 percentage.
TIP: You can improve the accuracy of your SpO2 readings by turning on all-day acclimation mode in the pulse
oximeter glance settings
1 Start a FLY activity.
2 Swipe up or down to scroll through the data screens.
Your most recent reading appears as an oxygen saturation percentage.
NOTE: If you are too active for the watch to determine your oxygen saturation, dashes appear instead of a
percentage. You should remain stationary for up to 30 seconds while the watch reads your blood oxygen
saturation.

Navigating to the Nearest Airport

1 Hold .
2 Select > Nearest.
3 If necessary, go outside to an area with a clear view of the sky, and wait while the watch locates satellites.
A list of the nearest airports appears.
4 Select an airport.
5 Press to start the flight timer.
NOTE: Your activity data is recorded only while the flight timer is running.
Flying
, and select
(Changing the Pulse Oximeter Tracking Mode, page
.
WARNING
26).
5