SolarEdge SE K Series Installation Manual page 46

If the inverter has already been activated and commissioned:
If not already ON - turn ON AC to the inverter by turning ON the circuit breaker
on the main distribution panel.
Open SetApp and follow the on-screen instructions (scan the inverter QR code,
move the ON/OFF/P switch to P position for 2 seconds and release).
The mobile device creates a Wi-Fi connection with the inverter and displays the
main Commissioning screen.
Setting Country, Grid and Language
The inverter must be configured to the proper settings in order to ensure that it
complies with the country grid code and functions. Unless these settings are selected,
the inverter will not start production.
1. From the Commissioning screen, select Country & Grid.
2. From the Country & Grid drop-down list, select the required option and tap Set
Country & Grid. If unsure, which regional grid code (Australia A, B, or C) to select,
contact your local grid operator to confirm the settings.
3. If relevant, from the Language drop-down list, select your language and tap Set
Language.
4. From the Commissioning screen, select Power Control and make sure all settings are
correct.
5. From the Commissioning screen, select Grid Protection and make sure all settings
are correct.
6. To save the information to a read-only file, tap the PDF icon (iOS) or the JPEG icon
(Android) at the bottom of the screen.
Pairing
1. From the Commissioning menu, select Pairing.
2. Tap Start Pairing.
3. When Pairing Complete is displayed, the system startup process begins:
Since the inverter is ON, the Power Optimisers start producing power and the
inverter starts converting AC.
WARNING!
When you turn ON the ON/OFF/P switch, the DC cables carry a high Voltage
and the Power Optimisers no longer output a safe output.
Three Phase Inverters with Synergy Technology
Chapter 5: Activating, Commissioning and Configuring the System 45