Replacing Rtc Battery (Optional) - Toshiba B-FV4D-GS12-QM-R Owner's Manual

4 Maintenance
4.2 Replacing RTC Battery (Optional)
If your printer has a built‐in real‐time clock (RTC), you will find the RTC
battery on the main board. The RTC battery keeps the RTC running when the
printer is turned off, so the RTC can keep track of the current time. You can
check the RTC battery from the status lights. If the RTC battery is low or out,
you need to replace it with a new one.
Take the following steps to replace your RTC battery:
1. Turn on the printer.
2. Locate the battery on the main board.
3. Remove the old coin battery and install a new one.
4. Turn off the printer.
Caution Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
Replacing RTC Battery (Optional)
32