Battery
Before using the equipment for the first time and/or following wintering, fully charge the
battery (see charging procedure on page 14).
The L100B Lithium battery MUST be recharged using the INFACO Lithium charger
(Ref.: 941C).
Using a different charger is prohibited as it may cause to a serious electrical accident
(explosion and/or fire)..
Compatible batteries
•
The table below lists the batteries that are compatible with the F3020 pruning
shears. However, the use of these batteries (other than the L100B) may reduce device
performances (see table below).
•
Using the L100B 36 V battery is to be preferred to get the best device performances.
L100B
36 V
•
If you want to use your F3020 pruning shears with one of the 48 volt batteries above,
an additional configuration parameter is required. Please contact your approved
INFACO dealer to find out how to do that.
The F3020 pruning shears are not compatible with the batteries for previous models (F3005 and
F3010).
Compatible batteries
831B
Operational but
not optimal
48 V
L850B
48 V
L810B
48 V
7