Table of Contents
Advertisement
Activation of the "closed blade" standby mode
The device has a standby mode making it possible to store your pruning shears quickly and
safely in the provided pruning shear holder.
1x
trigger closed
2x
Automatic standby switching
For your safety, the electronics are equipped with an automatic pruning shear standby
mode after 3 minutes of non-use (power LED flashing green). This time can be modified to
adapt to your needs by your approved INFACO dealer.
You then need to press the pruning shear trigger twice to start it back up.
Stopping the device
To power off your pruning shears, press the
ON/OFF button until the pruning shear LEDs
turn off. For your safety, it is recommended
to power off the pruning shears with the
blade closed.
Automatic device shutdown
The pruning shears are fitted with an
automatic shut down that cuts the power supply to the pruning shears if they are not used
for 15 minutes.
1. Press the trigger on the pruning shears
while keeping the blade closed.
2. Operate the adjustable blade opening
switch twice (= 1 on and off), without releasing
the trigger.
3. The device standby mode is activated when
the 3 charge level indicators scroll.
4. Then release the trigger, the unit is in the
"blade closed" standby mode.
5. In standby mode, the status LED flashes
green. To restart your device, press the trigger
twice.
1s
13
Advertisement
Table of Contents
