Table of Contents
Advertisement
Yearly maintenance
At the end of the pruning season, remember to put the batteries in wintering mode
to prevent their premature aging during storage
recommend that you use the annual maintenance service we propose. This will allow you to
start the following season in good conditions and in complete safety.
Transport precautions
The case is certified for the transport of Lithium batteries > 100Wh (UN 3480-3481
standard). However, some rules must be followed when shipping using a carrier:
•
The unit must be fully disconnected (pruning shears, cable, battery).
•
It is compulsory for the battery to be wintered and placed in the housing provided in
the case. The case must be taped shut correctly to prevent any risk of it opening.
Safety instructions
For any handling other than pruning, the shears must be in the closed position, disconnected
from the battery and placed in the battery-holder vest holster.
Caution: when the device is not in use (storage, transport, end of charging, etc.) is it
compulsory to disconnect the battery from the power cord. It is imperative to disconnect
the pruning shears from the power cord for the following operations:
•
When donning or removing the battery-holder vest.
•
When sharpening the blade.
•
When fitting, removing or lubricating the blade.
•
When changing the cutting head.
•
For all operations or repairs on the pruning shears.
•
For all operations other than pruning.
Handle the cutting edge of the blade very carefully when removing and adjusting it.
Do not try to cut wood that is too thick or materials other than vine wood and tree branches
(except when using specific kits).
When the equipment is in operation, always keep your hands well away from the cutting
head.
Do not use the pruning shears if you are tired or feel unwell.
Wear non-slip footwear. When working at height, use appropriate and adapted resources
(scaffolding, platform, etc.).
When using the device, keep both feet on the ground and keep as well-balanced as possible.
In wet weather, protect the battery. When disconnecting, make sure that no moisture
enters the battery socket.
34
(see page 15). Every year, we strongly
Advertisement
Table of Contents
