Table of Contents
Advertisement
Powering on
Always keep your hands away from the cutting head when the device is
powered on.
2x
1x
During this phase, if the blade stroke is obstructed by an external element, the
detected stop will not be valid. In that case, power off the pruning shears, remove
the obstacle from the cutting head and repeat the power-up procedure.
10
1s
1s
1.
First connect the cord to the battery
and then to the pruning shears taking
care to use the socket fail safe.
2.
Press the pruning shears ON/OFF
button until the LEDs light. All the LEDs
light for 1 second to test that they are
in working order. The pruning shears are
ready for initialization.
3.
Initialization
phase: Press the trigger
twice. The status LED flashes green
quickly and the blade opens if not
already open.
4.
Once the blade is open, press the
trigger until the blade is fully closed, the
status LED will switch to steady green.
The pruning shears are ready for
use.
Advertisement
Table of Contents
