infaco F3020 User Manual page 15

Wintering the battery
A battery wintering process is required in the following cases:
• At the end of the pruning season.
• When not in use for over 1 month.
• For transport before the annual servicing.
Wintering makes sure the battery is stored in good conditions. Battery wintering time can
be up to 10 hours.
1. Connect the battery to the charger
2. Press the wintering button
the status LED
(1)
3. Wintering process completed: the wintering LED
turns steady green.
(1)
The battery must be disconnected and stored in the case.
To enable or disable wintering mode, press the wintering button. Wintering mode is
automatically disabled when the charger is disconnected from the mains power outlet.
If a power failure occurs in wintering mode, the mode will will be deactivated.
When the power is restored, if the battery is still connected, a charge will be
carried out. Make sure to repeat the wintering process before storing.
Batteries that are connected to the charger for more than 13 days will automatically switch
to the wintering process.
to start the process. The wintering LED
(3)
flashes green
(1)
(2)
(1)
(2)
(2)
(3)
is steady blue and the status LED
(2)
(3)
turns blue and
15