About This Manual; Description Of P/2 Da8 And P/2 Da12 Series - Extron electronics VGA Distribution Amplifiers P/2 DA12 Series User Manual

Introduction

About This Manual

This manual contains information about the Extron P/2 DA8,
P/2 DA8 A, P/2 DA12 and P/2 DA12 A distribution amplifiers
with instructions on how to mount, install, and operate these
units.
Unless otherwise specified, references to "the distribution
amplifier" in this manual relate to the features or operation of all
four of these models.

Description of P/2 DA8 and P/2 DA12 Series

The Extron P/2 DA8 and P/2 DA12 series are a family of high
performance VGA-QXGA distribution amplifiers, available with
or without audio.
All models accept a single video input signal, which may be
RGBHV, RGBS, RGsB, RsGsBs, HDTV component (tri-level and
bi-level sync), S-video, or composite video. They are compatible
with resolutions from VGA (640 x 480) to QXGA (2048 x 1536).
The signal is distributed to eight (P/2 DA8 series) or twelve
(P/2 DA12 series) outputs, without modifying the signal: the
output video signal format follows the input format.
An XGA signal can be extended up to 150' over Extron mini high
resolution (MHR) cable.
The audio versions (P/2 DA8 A and P/2 DA12 A) also accept
a single, unbalanced audio signal and distribute it to eight or
twelve, balanced or unbalanced, audio outputs.
P/2 DA8 and P/2 DA12 • Introduction
1-2