Rear Panel Features - Extron electronics DVI DA2 User Manual

Rear Panel Features

SUPPORTS
DVI-D ONLY
POWER
12V
0.4A MAX
1 2
DVI-D INPUT
POWER
12V
0.4A MAX
Rear panel features
a
Power input — Connect the provided power supply to the
3.5 mm, 2-pole captive screw power receptacle.
b
Input connector — Connect the input signal to the female DVI
connector. The DVI input signal is equalized to ensure integrity.
N
c
Output Connectors — Connect up to four DVI-D outputs to
display devices, using the female DVI connectors.
d
Local Monitor connector — Output 1 (Local Monitor) is used
as a DDC reference. For the input device to provide a signal at
the correct resolution and refresh rate, there must be a display
device connected to output 1.
N
DVI DA2 and DVI DA4 • Installation and Operation
INPUT
4
1
LOCAL OUTPUT
Although DVI-I dual link connectors are used, the
DVI DA2 and DVI DA4 are only compatible with
single-link DVI-D video signals.
To ensure proper operation, display devices connected to
outputs 2-4 must be able to handle resolutions equal or
greater than that of the local monitor on output 1.
LOCAL OUTPUT
3
DVI-D OUTPUT
2 3
3
DVI DA2
OUTPUT
DVI DA4
4
2-7