3. Select 1 of the following options:
To...
Send the record
displayed,
Specify the start and end
records to resend,
Send all records that were
recalled,
After resending is complete, the screen returns to the earliest record of the
group. If Send a group of results is selected, the display first returns to the
screen from which the group was selected.
4. Select
Previous Screen
Deleting Results from Memory
To delete all patient or control results from memory:
1. Recall a group of results. Refer to Recalling Results‚ page 27.
2. Select
.
Delete
3. Confirm the deletion.
4. Select
Previous Screen
to return to the Ready/Run screen.
Ready/Run
Clinitek Advantus Operator's Guide
Select...
Send only this result
The SEQ # and ID of that record continues to
display on the sent option menu.
Send a group of results
1. Use the movement keys to specify the start
and end records to resend.
2. Select
to begin resending.
Enter
All records in the sequential group are sent.
The results tested using a loadlist may
NOTE:
include STAT tests carried out during the loadlist
testing.
Send all patient (control) results
as needed to return to the first record.
to return to the previous menu, or select
O
p
e
r a
t i
n
g
t h
e
S
y
s
t
e
m
Return to
29