Edit Flagged Results
Use the
Edit flagged results
as positive and selected for confirmatory reports. You can select this option
only if Mark positives is On, and confirmatory flags are set.
To...
disable editing,
allow editing of confirmatory reports,
Enter Sample IDs
You can enter specimen identification numbers either as part of a manually
entered load list or immediately prior to testing the specimen.
Use the
Enter sample IDs
numbers.
To...
disable entry of specimen identification
numbers,
force entry of specimen identification
numbers,
Tech ID
Identify the technician performing the tests. The Tech ID displays on the
Ready/Run screen, and on QC results only, or on both patient and QC results.
Use the
Tech ID
To...
n
disable display of the Tech ID,
i o
t
r a
display the Tech ID on QC results,
u
i g
display the Tech ID on QC and patient
f
n
results,
o
C
m
t e
s
y
S
102
cycle key to set editing of results that are flagged
cycle key to set entry of specimen identification
cycle key to set display of the Tech ID.
Select...
Off
On
Select...
Off
On
Select...
Off
On, control results only
On, both patient and control
results
Clinitek Advantus Operator's Guide