Saving Audiograms In Internal Memory; Loading Audiograms From Internal Memory; Printing Audiograms; Data Transfer To A Noah Database - Siemens SD 270 Service Manual

3.9 Saving audiograms in internal memory

The user may store up to 12 audiograms, referenced by number, in the
internal memory of the audiometer. To save the current set of audiogram
thresholds press the OPTIONS key, press the NEXT key repeatedly until
"Save Audiogram to " appears on screen. Use the UP key to select a
location numbered 1-12, then press the SAVE key. Any results for ULL
thresholds or speech testing (see Appendix 1) will also be saved.
Note that the Save process will overwrite any records that exist in the
memory location. Press the QUIT key once confirmation that the
thresholds have been saved appears on the screen.

3.10 Loading audiograms from internal memory

Press the OPTIONS key, press NEXT repeatedly until "Load Audiogram
no. " appears on screen. Select the required audiogram (1-12), using the
UP key then press the LOAD key. Press the QUIT key once confirmation
that the thresholds have been retrieved appears on screen.

3.11 Printing audiograms

Connect the audiometer to the printer with supplied printer cable (refer
to Section 2.5 of this operating manual for printer set-up). Insert the 6-
pin mini DIN into the DATA socket on the back of the audiometer.
Insert the terminal plug into the socket at the back of the printer.
Ensure the printer is switched on and ready to print.
Load the desired audiogram as described in 3.8; to print the current
audiogram ignore this instruction
Press the PRINT key. On the prompt "Is printer ready?" press the YES
key. The audiogram will then print.

3.12 Data transfer to a NOAH database

For transfer of test results stored within the audiometer to a NOAH
database you will need the Siemens link driver disc (stock number 105 98
699). This option includes a USB cable to connect to a PC and the
necessary installation & operating instructions.
Page 16 D00073611 Siemens SD 270 Service Manual