5. Remove the fixed platform by pulling the entire assembly towards you.
g
i n
t
o
o
h
s
l e
b
u
r o
T
Figure 20 Remove the Fixed Platform
6. Remove the holddown plate from the fixed platform. Refer to Performing
the Daily Cleaning ‚ page 37.
7. Remove the jammed strip.
8. Reinstall the holddown plate. Refer to Performing the Daily Cleaning ‚
page 37.
9. Reinstall the fixed platform. Refer to Performing the Daily Cleaning ‚
page 37.
10. Reinstall the push bar. Refer to Performing the Daily Cleaning ‚ page 37.
11. Turn analyzer power on.
12. Rerun the specimen(s) without results.
56
Clinitek Advantus Operator's Guide