Clarity Choices; Use Default Col/Cla During Run - Siemens Clinitek Advantus Operator's Manual

Clarity Choices

Clarity is only determined visually. You can specify up to 5 clarity descriptions.
Use this procedure to customize descriptions and remove defaults from the
reporting list.
1. Select
Clarity choices
The default clarity descriptions are Clear, SL Cloudy, Cloudy, Turbid, and
Other.
2. Remove default options from the reporting list:
The clarity descriptions included on the list are designated by a check
mark.
a. Select the check mark to remove it, and delete the option from the list.
The first option is always selected and cannot be made inactive.
3. Change the clarity description:
a. Select the word describing the clarity to change the description.
An alphabetic keypad displays.
b. Use the
Move Left
c. Enter the new name.
You can use up to 15 letters and spaces.
d. Select .
Enter
4. Select
Previous Screen

Use Default COL/CLA During Run

This option is only available if Color is reported and is Entered by tech, or
Clarity is reported.
Use the
Use default COL/CLA during run
clarity.
To...
display no default value,
set the first listed value for color and
clarity as the default,
The reported value can be changed prior to testing the specimen.
NOTE:
Clinitek Advantus Operator's Guide
.
key to erase the existing name.
.
cycle key to use a default color and
Select...
Off
On
S
y
s
t
e
m
C
o
n
f i
g
u
r a
t i
o
n
97