J Maintenance - Bicker UPS-1000-B1 User Manual

UPS-1000-B1

J Maintenance

The UPS contains no serviceable parts. In case of a malfunction the upstream power source has to be discon-
nected and cables have to be removed. Dangerous voltages are present inside the UPS. Therefore, during
maintenance and service work or in the event of a failure, the power source must be switched off, the battery
removed and the cables disconnected. Use a dry cloth for cleaning!
Attention! Safe handling of batteries
When replacing batteries, only use original batteries. 1 piece 24 V battery BP-2480 is installed.
All metallic objects such as chains, watches with metal bracelets or rings have to be removed before dismant-
ling the batteries.
Please ensure that the batteries are installed in the correct direction and that the polarity (+ and -) is correct
according to the device manufacturer's instructions. The battery wiring is to be fixed to the battery slide with
cable ties. The battery wiring is to be fixed to the battery slide with cable ties. The battery wiring is to be fixed
to the battery slide with cable ties.
Replaced batteries are hazardous waste that must be disposed of accordingly..
Do not throw batteries into fire  Risk of explosion!
Do not damage or open batteries. Any electrolyte that may leak out could irritate the skin and eyes.
Do not connect any other batteries in parallel.
No maintenance is required for the device operator.
Failure to comply with the safety instructions and warnings can result in damage to the system and
serious, and therefore fatal, personal injuries.
POLARITY OF THE BATTERY CONNECTOR
BP-2480
to UPS Mainboard
Reversing the polarity of the batteries can damage them and possibly the UPS mainboard, too!
If the battery poles short-circuit, high energy can damage the battery and the service personnel.
Use only tools with insulated handles.
29
Revision 1