Table of Contents
Advertisement
UPS-1000-B1
H Optical and acoustic indicators
No.
Symbol
1.
Overload
2.
Load level
3.
UPS is loaded
4.
Normal mode
Battery mode
SELF TEST
5.
AVR
Buck mode
6.
AVR
Boost mode
7.
Timer is enabled
8.
Thermal alarm
HIGH
Revision 1
Indication
The load exceeds the rating of UPS
The more bars, the higher the load
Load sensor adjusted ex works or deactivated 4.9
Display normal mode
AC out UPS output voltage AC in
mains input voltage
Display battery mode
Display UPS self test
AVR (Auto Voltage Regulator) is reducing the ouput voltage of the UPS
if the input voltage is too high.
AVR (Auto Voltage Regulator) is increasing the output voltage of the
UPS if the input voltage is too low.
This symbol will show up:
In the UPSILON 2000 software a on/off time was selected
The load sensor is adjustet, switch off after 60 seconds
The temperature inside the UPS is over 55 ℃. If the user does not reduce
the load, the temperature will continue to rise and the UPS will switch off
automatically at +60°C.
Description
22
Advertisement
Table of Contents
