Insignia Sauna Series Installation Manual page 25

KY1500 (KY0721 BT Panel)
2
1
3
4
6
5
9
8
10
11
12
Press to activate Sauna heaters. Pressing once will put the heaters on at 100%. Twice = 90%. Three times = 80%. Four
Press to cycle through the coloured lights. Each press will change colour until a full cycle is completed and they turn off.
Press to display temp, then cycle through desired temperature setting (max 60°C) using up and down arrows (Buttons 6/8). Press
again to display time, then cycle through desired time setting (max 99 mins) using up and down arrows (Buttons 6/8).
Use to Play/Pause music through various settings. When searching and tuning the radio, use to save a desired frequency
7
Press and use the arrows (Button 5/11) to manually search. Hold to tune radio stations automatically.
Press to cycle through the audio options, Radio/MP3/USB/Bluetooth or AUX. To connect the Bluetooth press the Audio
function (Button 10) until 'BT' is shown on the control panel. Pair the sauna with your device. Once connected a tone will
signify the connection has been successful and the Bluetooth icon showing on the panel interface.
Use to power the control panel on or off. Also use to unlock he panel (enters lock mode automatically after 60 seconds of inactivity).
www.insigniashowers.com
Control Panel Instructions
Button 1/2 (Sauna Heaters)
times = 70% and five times = Off.
Button 3(Lights)
Button 4 (Fan)
Press to turn the fan on, press again to turn it off.
Button 5 (Time/Temp)
Button 6/8 (Up and Down Arrows)
Use to cycle up or down through various setting options.
Button 7 (Play/Pause/Memory)
to a specific channel.
Button 9 (Set)
Button 10 (Audio Mode)
Button 11 (Alarm)
Press to activate the alarm, press again to deactivate it.
Button 12 (Power)
Last Modified: 03/03/2022
25