Insignia Sauna Series Installation Manual page 4

Electrical Requirements Model KY1600
Always consult a qualified Electrician before connection as to suitability
Your electrical contractor will understand ALL legal requirements of connection before
undertaking any work or installation.
UNDER NO CIRCUMSTANCES UNDERTAKE THIS YOURSELF WITHOUT CONSULTATION
Note for electrician: This product comes with 13 amp plug fitted with an RCD unit. We leave it
this way for you to connect it your own way due to continued additions to current regulations.
1) Connect within current laws and IP directives. Subject to room location.
2) (Preferred) Wire into isolated fused feed connecting directly to the house consumer/service
Always use protection against electrical surge. Your shower should be treated the same as a
home computer. A surge protector should eradicate the possibility of either the transformer or
Subject to connection type, electrical work needs to be signed off by a fully qualified operative
by law. Failure to adhere to this will not only void your electrical warranty for your sauna, but
could void your house insurance too.
Voltage Rating 220-240AC
Frequency Rating 50Hz
Power Rating 2916w
Amperage 12.15 amps
box.
control panel being burnt out.
www.insigniashowers.com Last Modified: 03/03/2022
Tools Required
You will require:
• •
Scissors Philips Screwdriver
• •
Knife Electric Drill
• •
Spirit Level Safety Gloves
• •
Tape Measure Safety Glasses
04