Unpacking And Checking Contents - Craftsman CMXEBAR600 Instruction Manual

English
TOOLS NEEDED FOR ASSEMBLY
supplied
2 mm hex wrench
4 mm hex wrench
Open end wrench
CARTON CONTENTS

Unpacking And Checking Contents

Carefully unpack the band saw and all its parts, and
compare against the list below and the illustration. With the
help of an assistant, place the saw on a secure surface and
examine it carefully.

WARNING: To avoid injury from unexpected starting
or electrical shock, do not plug the power cord into
a source of power during unpacking and assembly.
The cord must remain unplugged whenever you are
adjusting/assembling the saw.

WARNING: The saw is heavy and should be lifted with
care. If needed, get the assistance of someone to lift
and move the saw.

WARNING: If any part is missing or damaged, do
not attempt to assemble the band saw, or plug in
the power cord until the missing or damaged part is
correctly replaced.
Table of Loose Parts
iTEM DEsCRiPTiOn
Band saw
A.
Instruction manual
B.
Miter gauge
C.
Hardware bag
D.
Table lock handle
washer
Open end wrench
2 mm hex wrench
4 mm hex wrench
Band saw table assembly
E.
8
not supplied
Phillips Screwdriver
Adjustable Wrench
Combination Square
Feeler gauge
(size 0.02 in.)
Q'TY
1
1
1
1
1
1
1
1
1
UNPACKING YOUR BAND SAW
B
D
A
C
E