Download Print this page

General Usage Tips; Environmental Parameter - Pax Technology A35 Quick Setup Manual

Pos terminal

Advertisement

4) SAM Cards
① Remove the back cover (At the bottom of the terminal).
② Insert the SAM cards to the corresponding card slot.
5) microSD Card
① Remove the back cover (At the bottom of the terminal).
② Insert the microSD card to the corresponding card slot.
6) Magnetic stripe card reader
To use the magnetic stripe card reader, put magnetic stripe side of magnetic card towards device
interior, swipe the card with a steady speed during through magnetic reader slot.
(Support bi-directional swiping).
7) IC card reader
To use the IC card reader, put IC card chip side upward, push in IC card slot and to bottom.
8) Contactless card reader
To use the contactless card reader, tap the contactless card on the Top LCD screen area of the device,
indicated by the universal contactless icon on the screen, when prompted.
9) 1D/2D code reader
To use the 1D/2D code reader, put the 1D/2D code toward the top center area of the LCD.
10) Electronic signature
A35 supports electronic signature. Please be sure to use the finger to sign, do not use metal or sharp
objects to operate the touch screen, so as not to damage the touch screen.
11) Terminal Anti-theft
A35 provides a Kensington security hole on the rear side of the terminal, the end users can lock the
terminal on the countertop with a Kensington lock if necessary.
12) Audio Jack
If required, a visually disabled person can connect a headphone to the terminal for audio prompting
if the terminal application supports this using the 3.5mm output audio jack.

4. General Usage Tips

1) Avoid placing this product in direct sunlight for extended periods, nor in environments with
excessively high temperature, moisture or dust.
2) Only qualified personnel should repair this product.
3) Before using cards in the chip and magnetic stripe readers, please ensure they are free from any
foreign objects.
5. Password Entering Tips
It is highly recommended to enter password as following ways:
1)Set up anti-peep shields. Enter password with shield by the structures of cashier desk.
2)Place the POS terminal at an appropriate angle and make sure it is difficult to peer the password.
For example, the POS was installed above the movable bracket.
3)In enter password perspective, avoid surrounding video surveillance.
4)Paste text instructions to remind the customers to shelter with body or palm when enter
password.
5)Merchants can also choose other ways to protect the customer input password.

6. Environmental Parameter

3

Advertisement

loading