Advertisement
Refer to figure above. When swiping card, Please face the magnetic strip of the magnetic card to
the inside of the device, Meanwhile, Run the magnetic card across the magnetic chuck slot at a
uniform speed, with Two-way swipe; The swiping process should be smooth and uniform.
3) IC card
Refer to figure above，When inserting card，The IC card chip should face up. Push the IC card
gently and push it to the end，and then，IC card identifier should be displayed on LCD screen.
Do not insert card with great strength, so as not to damage the IC card or the host card holder.
Attention
Before inserting an IC card, check the IC card slot inside and around. If there are any suspicious
objects, please do not insert IC card and immediately report the relevant person.
4) Contactless card
Refer to figure above，When brushing the contactless card, place the contactless card within the
sensor area above the device LCD.
5. Installation and Usage Tips
1) Avoid putting the terminal in direct sunlight, high temperature, moist, or dusty environment.
2) Stay away from the liquid
3) Do not insert any foreign matter into any interface of the device. This may seriously damage the
device.
Advertisement
