Advertisement
distance is 0-4cm. You can use it by following these steps:
1) When running the contactless card reading and writing program, the contactless card function,
which is closed by default, will be opened.
2) Enter the "Menu" >" DEMO" > select the type (ISO 14443A/B or ISO 15693) according to the
label protocol. When placing the card over the battery cover of the device, the selected
contactless card can be read correctly.
3) After reading success, the device will make a short sound and the information related to the
card will be displayed quickly in the reading window area.
3. PSAM Card
After the Mobile Smart Terminal is installed with PSAM card, you can use
the demo for the of PSAM card.
1)
Enter the menu>DEMO> select "PSAM".
2)
Open the PSAM application, if the status bar shows that initiation is successful, the
PSAM card is recognized correctly. Then select corresponding card slot, voltage and
baud rate and other related settings.
3)
Input an APDU instruction in the input box or use the default random command, then
click "Send".
4)
After sending, the message returned by the command is displayed in the result bar, and
the status bar will prompt a successful send.
5.Installation and Usage Tips
Do not damage the USB cable and power adapter. Otherwise, they can't be used
1）
again.
2） Do not use battery chargers or batteries that are not special for the device to avoid damage
to the device.
3） Do not scratch the screen. Do not use pens, pencils or other sharp objects on the screen.
4） If the surface of screen is dirty, please use soft cloth to clean with diluent screen cleanser.
5） Discard the used polymer battery according to regulations. Do not throw the terminal into
the fire. Otherwise there is a risk of explosion.
6） Before connecting the power supply to the AC socket, check whether the power supply of
the socket is in accordance with the device specified operating voltage.
7） Please contact the special maintenance personnel when the device fails. The user is not
allowed to repair the device without authorization.
8） When using the device, do not irradiate human eyes to avoid injury.
Advertisement
