Table of Contents
Advertisement
English
courses and are supplied with the necessary
technical information.
Only use high-quality replacement parts in order
to avoid the risk of accidents and damage to the
unit. If you have any questions in this respect,
consult a servicing dealer.
STIHL recommends the use of genuine STIHL
replacement parts. They are specifically
designed to match your model and meet your
performance requirements.
Always clean and empty the tank and release
pressure in the sprayer before carrying our any
maintenance or repair work.
When cleaning the tank, tube and hose system,
make sure that other persons are not endan‐
gered by escaping liquid – risk of injury.
3
Assembling the Unit
The small hardware required for assembly is in
the tank.
3.1
Connecting Hose to Unit
► Push the union nut (1) over the hose (2).
► Push the hose (2) behind the shaft and onto
the elbow connector (3).
► Slip the union nut (1) onto the elbow connector
(3) and tighten it down firmly by hand.
3.2
Mounting the Spray Gun
2
1
► Push the union nut (1) over the hose (2).
6
1
3
3
► Push the hose (2) onto the connector on the
gun (3).
► Tighten down the union nut (1) by hand.
3
► Push the spray wand (4) into the connector on
the gun (3).
► Tighten down the union nut (5) by hand.
3.3
Mounting the Lever
2
The length of the handle (1) can be adjusted (A,
B, C) to suit the operator.
► Push the handle (1) into the lever (2).
2
The lever can be mounted on the left or right of
the unit.
► Push the lever (2) into the shaft (3).
3 Assembling the Unit
4
1
3
0458-597-0121-C
5
2
C
A B
Advertisement
Table of Contents
