Harness - Stihl SG 51 Instruction Manual

4 Harness

2
► Swing the lever (2) upwards.
► Lay the unit on its side.
2
The position of the lever (2) can varied to suit the
operator's size.
► Set the distance (A, B or C) as required.
► Insert retaining pin (4) in the hole in the shaft
(5) to secure the lever (2).
4 Harness
0458-597-0121-C
A
B
C
4
5
► Adjust the harness straps so that the back‐
plate fits snugly and securely against your
back
4.1 Adjusting the Height of Har‐
ness Straps
The harness straps can be adjusted to suit your
physique.
► Use a screwdriver to pry the pin (1) out of the
backplate
► Remove the pin (1) and pull out the ends of
the harness straps (2)
► Fit the ends of the harness straps (2) in the
lower position
► Insert the pin (1) and engage it in the back‐
plate
4.2 Adjusting the Harness Straps
The SG 71 is equipped with a waist/hip belt (not
available in all countries).
English
2
2
1
1
7