Table of Contents
Advertisement
Figure 115. Connect the power wires to the switching supply in the color order shown.
Make very sure the wires are connected in the right order! Make sure there
are no wire strands shorting from one power pad to the next one!
Figure 116. PTO L13 mounting detail. Coil connections shown. Front PTO coil wire must connect as shown.
The last component installed is the PTO coil. This coil was wound with extra turns so that the frequency can be
trimmed by removing turns.
Norcal NC2030 v5
12-18-05
Page 93 of 128
Advertisement
Table of Contents
