Table of Contents
Advertisement
1 - 50K pot plus nut and lock washer (SCAF Low Pass Filter cutoff control)
1 - 100K pot plus nut and lock washer (CW speed control)
1 - BNC antenna connector plus nut and lock washer
1 - Power connector plus nut and lock washer
1 - Switching supply tin
1 - PTO coil form
1 - Nylon nut for PTO coil form
1 - ¼-20 thin nuts
1 - 2" brass 6-32 screw
1 - 0.5" aluminum spacer threaded for 6-32
6 - 4-40 screws 3/8"
6 - 4-40 nuts with lock washers (used for board standoffs, lock washers give additional height)
6 - 4-40 nuts
Wire bag:
#26 wire - 8 feet
#30 wire - 16 feet
#32 wire - 3 feet
10 conductor
ribbon cable
Tube of solder
Status 12-12-05: Two other missing parts are being shipped out,
five 100 uf capacitors
for the main
receiver board and a
30 pf trimmer
cap. These are being shipped separately and are not included in
the above bags.
Norcal NC2030 v5
12-18-05
Page 20 of 128
Advertisement
Table of Contents
