20m only parts:
C52 - 5 pf
C76 - 68 pf
C77 – Not used
30m only parts:
C52 - 7.5 pf
C76 - 150 pf
C77 - Not used
Figure 68. Temporary soda straw PTO coil L13 connected to the PTO oscillator circuit.
The temporary PTO coil is made using 82T of #30 gauge enamel wire wound on a 2" section of a
McDonald's soda straw. This straw fatter than normal and is a bit larger than ¼" in diameter. The
diameter is not highly critical. This is a dummy inductor used to make sure that the PTO oscillator
works, and later on that the LO mixer, filtering, and LO amp work as well. If a more normal ¼"
diameter straw is used, use 95T.
Norcal NC2030 v5
12-18-05
Page 61 of 128