Table of Contents
Advertisement
T? - Record Memory 1:
Enter record mode for memory 1 with a PAH of the mem switch and both paddle switches for 2 seconds.
Hold the mem switch down, then squeeze both paddle switches simultaneously (they both must be down
at the same time), then release the paddle, keep holding the mem switch until after 2 seconds the keyer
will send T?. Memory 1 can now be recorded. Start sending your message. when complete, press the
mem key. The memory is 40 characters long - recording will terminate automatically after the 40th
character. If this menu item is entered accidentally, just PAR the mem switch to exit without recording.
Playing Memory 1:
First, hold the mem switch down, next, squeeze both paddle switches (they both must be down at the
same time) then release the paddle and finally release the mem switch before 2 seconds elapse. The
memory will start to play right after the mem switch release.
Notes:
To perform a full keyer reset (parameters to their default values, memories untouched):
1) remove power to the keyer
2) press and hold the mem switch
3) powerup the keyer keeping the switch depressed until the FB is sent.
One unique feature of the NorCal Keyer is 5 ditdah tune mode. If both paddles are held for at least 5
ditdahs and then released, the keyer will enter tune mode (key down, sidetone on). To exit, tap either
the dit or dah. Thanks to Lew Paceley, N5ZE, for inventing this mode.
Norcal NC2030 v5
12-18-05
Page 128 of 128
Advertisement
Table of Contents
