Christie Roadster S+12K Replacement Instructions Manual page 5

+
S 12K / 14K / 16K / 20K Lamp & Filter Instructions
STEP 10 - RECORD THE SERIAL NUMBER OF THE NEW LAMP
Neglecting to enter a serial number causes the lamp timer to NOT
reset to "0" and may cause the lamp life limit to expire prematurely.
(a)
Plug in the projector and power it up.
(b)
In the Lamp menu, select "Change Lamp". Refer to Figure 6, shown below.
(c)
In the Lamp S/N text box, enter the serial number.
(d)
Press ENTER to record the number and to reset the lamp timer. The timer will now
begin to log time for the new lamp.
013-100049-03 (Rev.1)
IMPORTANT
Figure 6. Lamp Menu
5 of 8 Pages