Table of Contents
Advertisement
FiberPlex FPX6000 Series User Manual
Installation steps
Installation consists of the following:
1. Remove the device from the packing container.
2. Install the FPX6000 onto a mounting surface:
– For mounting on a VESA-compliant TV or monitor, refer to section
bracket on a TV or monitor"
– For mounting the device in a 19-inch rack, refer to section
– For mounting on a wall, refer to section
– For mounting on a desktop or similar flat, sturdy surface, refer to section
page 25
3. Refer to section
"Installing cables"
4. When all connections are made and the LED indicators show normal operation, the installation is com-
plete.
Installation steps
on page 21.
"Wall mounting"
on page 25 to connect cables to the device.
3 • Hardware Installation
"Installing the VESA mounting
"Rack mounting"
on page 23.
on page 24.
"Desktop mounting"
on
20
Advertisement
Table of Contents
