Table of Contents
Advertisement
PC7501 User's Manual
4.5 Self-check
IMPORTANT
The self-check is a function to check the memory and other conditions of the emulator PC7501's internal circuit boards.
This function can only be executed after the emulator PC7501 is connected to an emulation probe M3xxxxTx-EPB or
R0ExxxxxxEPB00.
IMPORTANT
When executing the self-check, be sure to disconnect the target system.
IMPORTANT
Before executing the self-check, you may need to change settings of the emulation probe, so read the user's manual of
the emulation probe.
Figure 4.11 shows a transition of LEDs' on/off conditions during the self-check. Required time for the self-check is
about 30 seconds.
:AIMREMAMCE LNDE QRAPRED
8>><> .
?598 AMD 8>><> FKAQH IM NME RILE,
8>><> /
?598 FKAQHEQ AMD 8>><> KIGHRQ,
8>><> 0
?598 AMD 8>><> FKAQH AKREPMAREKU,
8>><> 1
?598 GNEQ NSR AMD 8>><> KIGHRQ,
Figure 4.11 LED display during the self-check
R20UT0207EJ0500 Rev.5.00
Nov 01, 2010
?EKF+CHECJ REPLIMARED MNPLAKKU
8LSKARINM OPNBE AMD FIPLTAPE
DN MNR LARCH
W @HEM RHE =732-. QUQREL IQ MNR TNPJIMG OPNOEPKU
=732-. QUQREL QRARSQ EPPNP
W @HEM A CKNCJ IQ MNR QSOOKIED RN RHE ELSKARINM OPNBE
8LSKARINM OPNBE IMIRIAKIVARINM EPPNP
W @HEM RHE ELSKARINM OPNBE IQ MNR TNPJIMG OPNOEPKU
8LSKARINM OPNBE QRARSQ EPPNP
4 <;
4 <99
4 6KIMJIMG
4. Setup
Page 37 of 50
Advertisement
Table of Contents
