Table of Contents
Advertisement
4.5 Self-check
IMPORTANT
The self-check is a function to check the memory and other conditions of the emulator PC7501's
internal circuit boards. This function can only be executed after the emulator PC7501 is connected
to an emulation probe.
IMPORTANT
When executing the self-check, be sure to disconnect the target system.
IMPORTANT
Before executing the self-check, you may need to change settings of the emulation probe, so read
the user's manual of the emulation probe.
Figure 4.11 shows a transition of LEDs' on/off conditions during the self-check. Required time for
the self-check is about 30 seconds.
Figure 4.11 LED display during the self-check
35 / 46
Advertisement
Table of Contents
