Switching The Digital Source Setting; Switching The Analog Input Setting - Pioneer AXM-P7050 Operation Manual

Section
08 Initial Settings
Switching the digital
source setting
It is possible to connect DVD player to this
unit. Activate the digital source when using
DVD player connected to this unit.
Initially, both Digital1 and Digital2 are set to
off.
! When a Pioneer DVD player is connected
to this unit with IP-BUS cable, you cannot
switch to the digital source setting.
1 Press o to select Digital.
Press o until Digital (e.g., Digital1) ap-
pears in the display.
2 Press r to turn digital setting on.
# To turn digital setting off, press q.
Switching the analog input
setting
It is possible to connect various equipment to
this units speaker input or RCA input. Acti-
vate the analog setting when using such
equipment connected to this unit, and select
the input according to the connecting meth-
od.
1 Press o to select Analog.
Press o until Analog (e.g., Analog1) ap-
pears in the display.
2 Press r to turn analog setting on.
Connection method (e.g., SP) appears in the
display.
3 Press m or n to select a desired con-
nection method.
Pressing m or n will switch between SP
and RCA and that status will be displayed.
# To turn analog input setting off, press q.
30
En