Recording One Track From A Source - Pioneer PDR-609 Operating Instructions Manual

1
DIGITAL
REC LEVEL
PUSH ENTER
ANALOG
L REC BALANCE R
MENU/
TEXT DELETE
SYNCHRO
CD TEXT
6
◊ÛB - >?/
SCROLL TIME
ERASE FINALIZE
•
REC SYNCHRO
TIME
A B C
1 2
DISPLAY
G H I J K L
/CHARA
4 5
SCROLL P Q R S T U V
7 8
MENU/
DELETE MARK
10/0 >10
4
CURSOR
3
1
ENTER
7
REPEAT RANDOM NAME CLIP
6
FADER PROGRAM CHECK
SKIP ID
SKIP PLAY
SET
CLEAR
Downloaded From Disc-Player.com Pioneer Manuals
Recording one
track from a source
If you want to record just a single track, or
a few selected tracks, from a digital (CD,
MD, DCC or DAT) or an analog source, the
recorder can start and stop automatically.
With digital recording, there's no need to
worry about recording levels—you'll get a
perfect digital copy of the original (if you
want to change the digital recording level,
see pages 23).
If you are recording from a noisy analog
source, such as a vinyl record, or from a
source with long quiet sections, the
ANALOG
recorder may not recognize the end of the
REC LEVEL
track. In this case, we recommend using
manual recording (see pages 22).
Legato Link Conversion
1 Load a CD-R or CD-RW disc.
Check the display to make sure that there's
3
enough space on the disc for what you
want to record.
2 Press INPUT SELECTOR to
choose an input.
AUTO MONITOR
MANUAL
Pressing
TRACK NO. INPUT SELECTOR
WRITE
AUTO INPUT
MANUAL SELECTOR
switches the active input:
Analog - Optical - Coaxial
2
The recorder's display indicates the current
input.
3 Make sure that the source is not
playing, then press SYNCHRO.
Press
SYNCHRO
recoding mode:
AUTO/
MANUAL
3
1-track sync
D E F
3
M N O
6
W X Y Z
9
All-track sync
NAME
¢
¡
All-track sync w/ finalization
8
CLEAR
I
NPUT
SELECTER
2
Record-pause (no sync)
Î
4
5
repeatedly
6
repeatedly to change the
CD-R
SYNC–1
SYNC-1
CD-R
SYNC–ALL
SYNC
CD-R
SYNC–FINAL FINALIZE
SYNC
CD-R
O1 O1 OO:OO
4 Getting Started
Synchro recording will not work if the
source is already playing!
The - indicator will start to blink
1
SYNC
when the recorder is ready.
CD-R
SYNC-1
SYNC - 1
The display shows the 1-track sync mode,
with the - indicator blinking to
1
SYNC
show that recording can start.
Play the source.
The recorder starts recording automati-
cally.
The recorder pauses recording
after recording one track.
If you're recording a CD or MD, recording
pauses automatically when the track
changes or there is more than five seconds
of silence on the source.
If you're recording from DCC or DAT tape,
recording pauses when the recorder
encounters a new start ID or there is more
than five seconds of silence on the source.
(See also Digital recording from DAT on
page 18.)
If you're recording from analog, recording
pauses automatically when there is more
than two seconds of silence on the source.
If you're done, press 7 .
To record further tracks, simply repeat
steps 3 to 5.
After pressing 7, the display shows
while it records the track information
REC
to the disc.
Note: If you want to record CD text
information, you must record the entire
disc (See Automatically recording and
finalizing a disk on page 21). Text will not
be copied when you record an individual
track.
If you find that synchro recording does not
seem to work, see the troubleshooting
section on pages 40–42for possible
remedies.
PMA
19