TE Connectivity PRO-CRIMPER III Manual
Hide thumbs
Also See for PRO-CRIMPER III:
- Instruction sheet (11 pages) ,
- Original instructions manual (6 pages) ,
- Instruction sheet (6 pages)
Advertisement
Quick Links
We have 45,000 LP502030-PCM-NTC-LD-A02554 - EEMB - Lithium Battery Rectangular 3.7V 250mAh Rechargeable in
stock now. Starting at $0.034. This EEMB part is fully warrantied and traceable.
Looking for a discount?
Check out our current promotions!
This coversheet was created by Verical, a division of Arrow Electronics, Inc. ("Verical"). The attached document was created by the part supplier,
not Verical, and is provided strictly 'as is.' Verical, its subsidiaries, affiliates, employees, and agents make no representations or warranties
regarding the attached document and disclaim any liability for the consequences of relying on the information therein. All referenced brands,
product names, service names, and trademarks are the property of their respective owners.
00000005981LF-000
90872-1
EOS Power
TE CONNECTIVITY
Buy Now
Buy Now
Give us a call
1-855-837-4225
International: 1-555-555-5555
1-415-281-3866
1-415-281-3866
Arrow Electronics,
Arrow Electronics, Inc
Verical Division
9201 East Dry Creek Road
P.O. Box 740970
Centennial, CO 80112
Los Angeles, CA 90074-0970
Advertisement
Related Manuals for TE Connectivity PRO-CRIMPER III
Summary of Contents for TE Connectivity PRO-CRIMPER III
- Page 1 We have 45,000 LP502030-PCM-NTC-LD-A02554 - EEMB - Lithium Battery Rectangular 3.7V 250mAh Rechargeable in stock now. Starting at $0.034. This EEMB part is fully warrantied and traceable. 00000005981LF-000 90872-1 EOS Power TE CONNECTIVITY Buy Now Buy Now Looking for a discount? Check out our current promotions!
- Page 2 PRODUCT INFORMATION 1-800-522-6752 For latest revision and Regional Customer Service, *Trademark visit our website at www.te.com LOC B TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product and/or Company names may be trademarks of their respective owners.
- Page 3 408-9967 Locator Assembly Tool Frame Locator Insulation Die Retaining Pins Chamfer Crimper Wire Crimper Offset Wire Anvil Insulation Chamfer Die Retaining Screws Anvil Figure 2 The tool features a tool frame with a stationary jaw 5. Place the wire crimper and insulation crimper so that their chamfered sides and their marked and handle, a moving jaw, a moving handle, and an adjustable ratchet that ensures full contact crimping.
-
Page 4: Crimping Procedure
408-9967 4. CONTACT SUPPORT ADJUSTMENT contact is still being bent during crimping, repeat the adjustment procedure. The contact support is preset prior to shipment, but NOTE minor adjustment may be necessary. Refer to 5. CRIMPING PROCEDURE Figure 3. This tool is provided with a crimp adjustment NOTE feature. - Page 5 408-9967 Make sure that both sides of the insulation barrel Proceed as follows: CAUTION are started evenly into the crimping section. Do 1. Refer to Figure 4 and select a wire (maximum NOT attempt to crimp an improperly positioned size) for each crimp section listed. contact.
-
Page 6: Maintenance
Ensure that the tool and dies are clean by wiping them Customer-replaceable parts are shown in Figure 1. with a clean, soft cloth. Remove any debris with a Available separately, PRO-CRIMPER III Hand clean, soft brush. Do not use objects that could Crimping Tool Repair Kit 679221-1 includes a damage the tool. - Page 7 408-9967 Die Assembly 90872-2 Can Be Used in the Following Tools: PRO-CRIMPER III Hand Tool Frame 354940-1 SDE-SA Hand Tool 9-1478240-0 (Instruction Sheet 408-9930) (Instruction Sheet 408-8851) SDE Bench Terminator 1490076-2 626 Adapter 679304-1 (Customer Manual 409-10052) (Instruction Sheet 408-4070)