Serial Menu - Pepperl+Fuchs K23-SSI/USB/25B-C Manual

K23-SSI/USB/25B-C | O
STANDSTILL TIME(s)
This parameter defines the downtime. When downtime is detected, a downtime
signal is signaled after xx.xx seconds.
Value
0.01
...
99.99
AVERAGE FILTER—SPEED (filter for average determination)
Switchable average determination for preventing velocity fluctuations.
Value
0
1
2
3
4

4.6 Serial Menu

The default settings for the serial interface are defined in this menu.
UNIT NUMBER
This parameter can be used to set serial device addresses. The devices can be
assigned addresses between 11 and 99. Addresses that contain a "0" are not
allowed since these are used as group or collective addresses.
Value
11
...
99
Note
Device address is fixed to "11" for USB interface and cannot be adjusted
38
S OS6.0
PERATING OFTWARE
Function
Shortest delay time in seconds
Longest delay time in seconds
Function
No average determination
Flowing average determination with two cycles
Flowing average determination with four cycles
Flowing average determination with eight cycles
Flowing average determination with 16 cycles
Function
Smallest address without zero
-
-