HART Loop Converter KFD2-HLC-(Ex)1.D(.**)
Editing device data: Parameterization mode
8.1.4 Lowest menu level: select values, enter normal numbers
On the lowest level of the menu, you can either select one of several possible values, or enter a
number for the individual parameters.
Proceed as follows (for floating decimal number, see section 8.1.5):
Parameter
When entering normal numeric values, please note:
•
If you press the
•
If you hold the
8.1.5 Lowest menu level: enter floating decimal numbers
Enter floating decimal numbers as follows:
•
positive numbers with four-digit mantissa, decimal point in or after the mantissa, exponent in three
stages from E-33 and E00 to E33
•
negative numbers with minus sign, three-digit mantissa, decimal point in or after the mantissa,
exponent in three stages from E-33 and E00 to E33
← ESC
← ESC
← ESC
or
keys, the value changes step by step.
or
keys, the value "rolls" to higher or lower values.
Lowest menu level
OK →
Current value, flashing
: ↓
,
New value, flashing,
OK ↓
New value, not flashing,
not saved
saved
19