Table of Contents
Advertisement
10.2.6. Management points attribute descriptions
The following sections describe the management points attributes
windows in detail.
Common 1 tab
This tab has the common items for any type of management points.
The number of displayed items may vary, depending on the type of
management points.
a
b
c
d
e
f
g
Field
Explanation
The port number of the management point.
For a list of the range of values, refer to
a
Port No.
"Acceptable range for management points port
numbers and addresses table" on page
The port address of the management point.
To change the value, click the drop-down lists
and choose the desired value.
b
Address
For a list of the range of values, refer to
"Acceptable range for management points port
numbers and addresses table" on page
c
Detailed Type
The previously chosen management point type.
The management point ID. This is automatically
d
Mgmt. Pt. ID
chosen by the system and cannot be modified.
The management point name (up to
12 characters).
e
Name
To change this name, click Modify.
Information about the management point, if
deemed necessary (up to 50 characters).
f
Detailed Info.
To add more info, or change the info added,
click Modify.
The icon of the chosen management point type.
g
Icon
To change this icon, click Modify and select the
desired icon.
(a) All addresses must be different. An error will occur if you choose a duplicate
address.
Acceptable range for management points port numbers and
addresses table
Type
Port No.
Di / Pi
1
Indoor
1
Ventilator
1
Installer reference guide
19
19.
19.
Address
2~4 (default: 2)
1-00~4-15 (default: 1-00)
1-00~4-15 (default: 1-00)
Ventilator tab
Field
Ventilation Mode
Fresh Up
(a)
Auto Air Volume
INFORMATION
Under normal operation, the volume of fresh air supplied
into the room and the air of the room exhausted outdoors is
equivalent.
When any of the Fresh Up operations in the intelligent Tab
Controller app is chosen, the amount of fresh air supplied
into the room will be larger or smaller than that of the air
exhausted outdoors (this last choice can be set on the
connected wired remote controller).
When more air is being supplied into the room, a positive
pressure will be created. This can help prevent odours and
moisture from kitchens and toilets from flowing into the
room.
When less air is being supplied into the room, a slightly
negative pressure will be created. This can prevent
hospital odour and floating bacteria from flowing from the
room into the corridors.
Explanation
Selecting ventilation mode will activate the
Ventilator tab of this ventilation unit in the intelligent
Tab Controller app. If selected, the Fresh Up and
Auto Air Volume fields will be enabled.
Enable this option if you want to give the end-user
control over the ventilation mode of the connected
ventilation units.
If selected, Fresh Up operations will be added to
Ventilation Amount on the Ventilator tab in the
intelligent Tab Controller app.
Enable this option if you want to give the end-user
the possibility to enable/disable Fresh Up mode for
the connected ventilation units. For a brief
description of ventilation mode, see the information
box below.
If selected, Auto operations will be added to
Ventilation Amount in the intelligent Tab Controller
app.
Enable this option if you want to give the end-user
the possibility to enable/disable Auto Air Volume
mode for the connected ventilation units. When
choosing any of the Auto options, air pressure will
be automatically regulated in response to CO
(if the correct CO
sensor is installed).
2
intelligent Tab Controller
levels
2
DCC601A51
4P420109-1 – 2015.10
Advertisement
Table of Contents
