INSTALLATION INSTRUCTIONS
PWVIA RM P12 switches are intended for desktop use, or to be mounted in a standard 19" equipment rack, using the integral
rack ears (models PWVIA RM P12 RJ45EC [DUO/QUAD] POE) or the included rack ear accessories (models PWVIA RM P12
RJ45EC[SFPSLOT/1GSFP/10GSFPP] [NONPOE/POE]).
Rack ears included with the PWVIA RM P12 RJ45EC[SFPSLOT/1GSFP/10GSFPP] [NONPOE/POE] models for attaching unit to 19" equipment rack
Use the included machine screws (2 per side) to attach the rack ears to the either side of the metal chassis (PWVIA RM P12
RJ45EC[SFPSLOT/1GSFP/10GSFPP] [NONPOE/POE] models).
TM
If using the PWVIA RM P12 on a desktop permanently, you may wish to apply the included adhesive rubber feet pads to the
bottom of the unit. Simply peel them off the adhesive backing and apply to the bottom of the metal enclosure, with one on
each corner.
OPTIONAL MOUNTING ACCESSORIES
Wall-mount kits (PWACC WMLG) and Truss-mount adapters (PWACC TMLG) are available as accessories.
TM
PWACC WMLG Wall-mount Kit
2
LINK/ACT
PORT 1
LINK/ACT
POE
PORT 1
PORT 2
PORT 3
PORT 4
PORT 5
PORT 6
PORT 7
PORT 8
PORT 9
PORT 10
PWVIA RM P12 Ethernet Switches - Manual
PORT 2
PORT 3
PORT 4
PORT 5
PORT 6
LINK/ACT
TM
PWACC TMLG Truss-mount Kit
POE
PORT 7
PORT 8
PORT 9
PORT 10
POE
PORT 1
PORT 2
PORT 3
PORT 4
PORT 5
PORT 6
PORT 7
PORT 8
PORT 9
PORT 10
July 2021