Warning - pathway VIA PWVIA RM P12 User Manual

You will then see several transactions populate in the transaction editor, which will be automatically sent. To discard changes,
click the button.
The Advanced Properties panel will allow for global configuration of VLAN Ranges, Management VLAN, and VLAN Support
on and off.

WARNING

Changing any of these global VLAN properties may cause you to immediately lose connectivity to same or all
of your devices. You may no longer be able to set properties on those devices using Pathscape. Make sure that
these changes are correct before committing.
See Appendix 3: VLANs for further details on how to use VLANs.
The VLAN Support drop-down allows for enabling or disabling of VLANs.
VLAN Range Start and VLAN Range End will determine the range of VLAN IDs available to use. Default is 1 and 10,
respectively. To edit the start and end ID values, either type into the text fields or click on the up and down arrows to modify
the value. To make the desired changes, click the button. You will then see several transactions populate in the
transaction editor, which will be automatically sent. To discard changes, click the button.
Management VLAN ID sets which VLAN is used by the switch management processor(s). Default is 1. It is strongly
recommended that the Management VLAN ID be set to the same value as the VLAN Range Start value. Care must
be taken that the Management VLAN is used by at least one Normal/Untagged port on the switch, or the ability
to configure the switch may be lost.
See Appendix 3: VLANs for further details on how to use VLANs.
40
PWVIA RM P12 Ethernet Switches - Manual July 2021